Leather Wet Mold DIY, Double Tray 7" x 7.5" Leather Tray, 3 pc Set

Name: Leather Wet Mold DIY, Double Tray 7" x 7.5" Leather Tray, 3 pc Set
Brand: Buckleguy
SKU: TLWM-DBT-7x7.5-3P
Price: 75 USD
Availability: InStock

SKU:

TLWM-DBT-7x7.5-3P

Weight:

5.50 Ounces

$75.00

(No reviews yet) Write a Review

DIY Leather Wet Mold for a 7"x7.5" inch Double Tray

Large slot is 4"x7" and the small slot is 2"x7". The two trays combined from side to side have a LxW of 7"x7.5".

This 3-piece DIY kit set is perfect for making beautiful leather valet trays. We use 1" thick marine grade plywood. It is unlacquered and does not need to be lacquered due to the properties of the wood and glue type. We have used many molds hundreds of time for years with no issues!

We recommend using up to 12oz veg leather. If you wish to use lighter weight leather you can simply add felt or other material to the back of the leather to help compress the leather fully around the mold as you want a snug fit.

How-To Steps:

Cut leather piece about 1.5" to 2" inches wider than the tray size. So if making a 8" tray, cut a roughly 9.5" leather circle.
Soak leather in warm water. About 5-10 minutes or until completely soaked.

Natural unfinished leathers soak quickly. Bridles and finished leathers may take longer to fully soak.

Place leather over the inner mold, and then place the outer mold on top of the leather. Push outer mold down with hands or clicker press to compress the leather around the inner mold.
Place clamps on edges of outer mold and wood base.
Let sit for 24 hours until dry.